Sur-Tec Video

SUR-TEC is a liquid, premium buffering and enhancement agent, designed to maximize the efficiency of chemical spray solutions.  This ALL-IN-ONE PRODUCT makes tank mixes for herbicides and pesticides easy and super effective; raising chemical efficiency by up to 100%.

HOW DOES SUR-TEC SAVE YOU TIME AND MONEY:           

ONE GALLON OF SUR-TEC TREATS 800 TO 1,000 GALLONS OF WATER FOR SPRAY MIX

This protects chemical solutions from alkaline hydrolysis (product degradation) and increases their efficiency.  No additional surfactants, stickers, spreaders, penetrants, etc., needed.

SUR-TEC TESTIMONIALS

We own a flying service and maintain ground rigs.  In our business, time is money.  Sur-Tec flows through the planes better than any product out there!  Southern Kansas Flying Service. . .

 With Sur-Tec I don’t have to spend time messing with dry bags anymore!  Midwest Kansas Farmer. . .

Sur-Tec gives me a more even distribution of herbicide and I get a better kill.  Southern Minnesota Farmer. . .

I farm 20,000 acres and I have never seen a product perform like Sur-Tec!  We have used it in the worst spraying conditions and still got excellent kills.  South Dakota Farmer. . .

Putting everything in one jug not only makes it easy to use but gives us great kill.  Oklahoma Farmer. . .

It started raining before I got done spraying, but I still got a great kill across the whole field!  Minnesota Farmer. . .

The Most effective and simple to use product I have ever worked with.  I love Sur-Tec!  Iowa Applicator. . .

Material Safety Data Sheet

Material Safety Data Sheet                   U.S. AG LLC              U.S. Department of Labor
Required under USDL Safety &           542 Wilson Rd                         Occupational Safety &
Health Regulation (29 CFR 1915)         Luthersville, GA 30251             Health Administration
____________________________________________________________________________

Section 1. General Information
Manufacturer Name: U.S. AG LLC. Date Prepared: 03/06/09
542 Wilson Rd.
Luthersville, GA 30251
Product Name: Sur-Tec
Chemical Name: Sulfuric Acid
Product Class: mixture (see Section 2)
____________________________________________________________________________

Section II: Composition and Information
Ingredient CAS Number Approx. Wt.
Sulfuric Acid 007664-93-9 <10%

Section III. Emergency Hazardous Summary
None Dot Class: 70
____________________________________________________________________________

Section IV. Physical and Chemical Characteristics
Physical State: Liquid PH: 0.4
Boiling Point: 212 ºF Solubility in water: Complete
Melting Point: N/A Wt. per gal: 11 - 11.2 #
Vapor Pressure: N/A Appearance & Odor: Red & Typical
Vapor Density: N/A Evaporation Rate: N/A
____________________________________________________________________________

Section V. Fire and Explosion Hazard Data
Flashpoint: Non-flammable Extinguishing Media: This product does not support combustion
Special Firefighting Techniques: None Unusual fire & Explosion Hazard: None
____________________________________________________________________________

Section VI. Reactivity Data
Stability: Stable Incompatibility ( materials to avoid): None
Hazardous decomposition products: None Conditions to avoid: None
____________________________________________________________________________

Section VII. Health Hazard Data
Routes of entry: Ingestion Health Hazards: None
Effects of overexposure: Acute/None
Chronic None Anticipated
Acute Oral LD50: N/A

Preventative measures and Personal Protection
-Intended for plant and/or soil use. Not for human or animal consumption.
Eyes: Flush with clean water for 15 minutes. If irritation persists, consult a physician.
As with all chemicals, eye protection should be used.
Skin: Wash with soap and water. If irritation develops, consult physician.
Ingestion: If ingested consult a physician immediately. Do not induce vomiting.
Inhalation: Use in well ventilated area, however if symptomatic, remove to fresh air.
Consult a physician.
____________________________________________________________________________

Section VIII. Precautions For Safe Handling & Use
Spills or releases: Absorb product with oil dry or cat litter. Flush area with water.
Waste Disposal: To be preformed in compliance with all federal, state and local regulations
Precautions in handling/storage: None
____________________________________________________________________________

Section IX. Special Precations
Product is not damaged by freezing other than container breakage due to expansion. Avoid prolonged storage above 120°F.
As with all products compatibility tests should be conducted prior to mixing with any chemicals.

Section X. Special Production Information
Special ventilation: None required
Personal Protection: Safety goggles recommended
Gloves (latex or butyl) recommended
Other: N/A
Monitoring exposures: None
____________________________________________________________________________

Section XI. Special Precautions and Comments
The above furnished information is believed to be correct on the date it was published. This MSDS is provided without any
warranty expressed or implied. Users should consider this data as a supplement to other information gathered by them and
must make independent determinations of suitability and completeness of information from all sources to assure proper use and
disposal of these materials and the safety and health of employees and customers and the protection of the environment.

We accept Farm Plan and we can assist you with financing needs for your crop input . Contact us today to see how we can be of help to you.

We Accept:

At PHD MAXIMUM CROP the customer comes first. PHD MAXIMUM CROP offers a complete line of nature friendly fertilizers and soil conditioners. These products have proven themselves time and time again in all types of soil conditions to increase yields and profits. Everyone needs to give our program a try. You'll be glad you did! Along with our excellent fertilizer programs, PHD Maximum Crop offers a complete line of plant seeds.

We make no warranty of any kind, expressed or implied with respect to any products. Manufacturers and sellers obligation limited to replacement of product for defective material only. Neither seller nor manufacturer shall be liable for any injury, loss or damage directly or consequently arising from the misuse or inability to use the product.